Skip to main content

Fire Prevention 

Informational poster titled “100' Defensible Space – Make Your Home FIRE SAFE.” The main graphic shows a home with surrounding defensible zones: Zone 0 (0–5 feet), Zone 1 (5–30 feet), and Zone 2 (30–100 feet), illustrating steps like removing dead plants, trimming branches, and spacing trees. Side text explains the importance of maintaining 100 feet of defensible space to protect homes from wildfire. It outlines state law compliance, fire behavior, and vegetation management. Logos from Cal Fire and other fire agencies are included at the bottom.
Fuels Reduction Application  _ English Fuels Reduction Application - Spanish 

Please upload video to YouTube or Vimeo and embed here

Primary Fuel Break or Home Ignition Zone: is the zone at least 30 feet from the home starting from the outside edge of the home’s furthest extension. This may be the edge of a roof eve or the outside edge of a deck or porch. For most homeowners, this area is the residential landscape. This often has irrigation, contains ornamental plants and is routinely maintained. If irrigated, the area should be:

  • Lean - only a small amount of flammable vegetation should be present with in the 30 feet of the house
  • Clean- no accumulations of dead vegetation or flammable debris with in the area
  • Green – plants located within this area are kept healthy, green and irrigated during the fire season

Secondary Fuel Break or Wildland Fuel Reduction Area: is the area that lies beyond the primary fuel break or residential landscape area (an additional 20 to 70 feet ) and is where sagebrush, juniper and other wild plants grow. Within this area:

  • Remove all dead vegetation (dead brush, dried grass and fallen branches)
  • Thin out thick shrubs and trees to create a separation between them – use shaded fuel break techniques
  • Remove ladder fuels by removing low tree branches and removing or pruning any shrubs under the trees
  • Remove all dead vegetation (dead brush, dried grass and fallen branches)
  • Thin out thick shrubs and trees to create a separation between them – use shaded fuel break techniques
  • Remove ladder fuels by removing low tree branches and removing or pruning any shrubs under the trees